ZR-1 Net Registry Forums - View Single Post

george henry · 07-14-2007

Hello. Just replaced all 16 injectors with Accel part number 150121 from Atlantic Speed for about $500. This took care of my high idle problem as well as a bad lack of power (bad stumble when the secondaries kick in), also replaced the PCV hose with the unit from White Racing and got new PCV valves. The old hose was a loose fit to the valves and this probably contributed to the high idle (1200 rpm), it now goes right to 750 rpm after start. The injectors were the originals and ethanol had taken its toll on them. I was a first timer on the plenum removal, it's not that big of a deal.
1990 #1507

07-14-2007	#17
george henry Join Date: Aug 2006 Location: San Diego, CA Posts: 24	Re: fuel injectors Hello. Just replaced all 16 injectors with Accel part number 150121 from Atlantic Speed for about $500. This took care of my high idle problem as well as a bad lack of power (bad stumble when the secondaries kick in), also replaced the PCV hose with the unit from White Racing and got new PCV valves. The old hose was a loose fit to the valves and this probably contributed to the high idle (1200 rpm), it now goes right to 750 rpm after start. The injectors were the originals and ethanol had taken its toll on them. I was a first timer on the plenum removal, it's not that big of a deal. 1990 #1507