ZR-1 Net Registry Forums - View Single Post

XfireZ51 · 11-02-2014

Jeff,

A couple of years ago, I pulled the passenger side cam cover off to remove the Scotch Brite installed in the crankcase vent. If you recall, I was getting oil leaks from excessive crankcase pressure whenever I would go WOT. Replacing the Scotch Brite w the foam from Haibeck did the trick for me. As for the cam cover
"biscuits" at each end, I used the same anaerobic sealer as I did for the rest of the cover.

11-02-2014	#2
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,686	Re: Cam Cover questions and other stuff Jeff, A couple of years ago, I pulled the passenger side cam cover off to remove the Scotch Brite installed in the crankcase vent. If you recall, I was getting oil leaks from excessive crankcase pressure whenever I would go WOT. Replacing the Scotch Brite w the foam from Haibeck did the trick for me. As for the cam cover "biscuits" at each end, I used the same anaerobic sealer as I did for the rest of the cover. Last edited by XfireZ51; 11-02-2014 at 10:06 AM. Reason: Thanks Jerry. Anabolic is a steroid.