ZR-1 Net Registry Forums - View Single Post

BennieC. · 11-01-2014

The p/s fluid cooler will need to be unbolted and just let it hang. The rack and pinion will need to be unbolted and lifted up as much as it can to access the harmonic bolt and install a puller. It's been a few months since I did it and I believe the engine has to be lifted to clear the cross member as the harmonic balancer pulled forward. To reinstall, my installer was not long enough to reach the thread on the crankshaft so I had to modify the crank bolt. PM me your cell no. and I'll text you pics.

11-01-2014	#5
BennieC. Join Date: Feb 2013 Location: Sacramento Posts: 21	Re: Harmonic Balancer Removal The p/s fluid cooler will need to be unbolted and just let it hang. The rack and pinion will need to be unbolted and lifted up as much as it can to access the harmonic bolt and install a puller. It's been a few months since I did it and I believe the engine has to be lifted to clear the cross member as the harmonic balancer pulled forward. To reinstall, my installer was not long enough to reach the thread on the crankshaft so I had to modify the crank bolt. PM me your cell no. and I'll text you pics.