ZR-1 Net Registry Forums - View Single Post

jonszr1 · 06-24-2007

Gene , no problem we all gotta learn , iremember all my ?s at first. but the guys were nice and still helped . the Iac is on the passenger side of the throttle body . there is a water tight connector on it . it has 2 small torx bolts that hold it in. there is also a o ring that dreates a seal . you could take it off and spray carb cleaner on it . just be carefull dot wipe it just spray.. a couple of thoughts . have you cked the pvc val;ves or the rubber hose where the pvc valves located for a leak these have a tendancy to go bad. DO YOU HAVE A HELMS MANUAL. if not get one they really help alot .just take your time looks scaryer that it really is. or see if there is another zr1 er in your area that might help ya out .

06-24-2007	#4
jonszr1 Join Date: Sep 2006 Location: lone pine and mammoth lakes Posts: 1,406	Re: Stalling at stop Gene , no problem we all gotta learn , iremember all my ?s at first. but the guys were nice and still helped . the Iac is on the passenger side of the throttle body . there is a water tight connector on it . it has 2 small torx bolts that hold it in. there is also a o ring that dreates a seal . you could take it off and spray carb cleaner on it . just be carefull dot wipe it just spray.. a couple of thoughts . have you cked the pvc val;ves or the rubber hose where the pvc valves located for a leak these have a tendancy to go bad. DO YOU HAVE A HELMS MANUAL. if not get one they really help alot .just take your time looks scaryer that it really is. or see if there is another zr1 er in your area that might help ya out .