ZR-1 Net Registry Forums - View Single Post

XfireZ51 · 08-25-2014

Billy,

Just a couple of suggestions.

1. The BLM split between left and right banks is not unusual particularly at low airflow levels like idle. If you are going to swap out injectors, it should not be because of that alone. If you suspect something else fine. Also, depends on mileage.

2. If stock coils and wires then I would upgrade these.

3. You'll need to make sure you drain coolant to levels below plenum.

08-25-2014	#5
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,685	Re: Pulling the Plenum for the first time... Billy, Just a couple of suggestions. 1. The BLM split between left and right banks is not unusual particularly at low airflow levels like idle. If you are going to swap out injectors, it should not be because of that alone. If you suspect something else fine. Also, depends on mileage. 2. If stock coils and wires then I would upgrade these. 3. You'll need to make sure you drain coolant to levels below plenum.