ZR-1 Net Registry Forums - View Single Post - Rebuilding Top End #3032 (Last 1990 Sold)

Dynomite · 08-17-2014

Fired it up and it ran perfectly ......even with TB Coolant BLOCKED

Which by the looks of it....NO ONE can tell TB Coolant Blocked at Injector Housing. And.......those hoses for TB Coolant are brand new WITHOUT Clamps (why have clamps when there is NO Coolant Pressure).

Those RC SL4-205 Injectors run sooooo smooth

Again...this three day Top End included one day for disassembly and repair/restoration of parts, one day for thinking, and one day for re-assembly (including a test drive up to 120 mph).

Note:

The Nice RC Injectors Red Stencil on corner of rear lift top glass.

08-17-2014	#6
Dynomite Join Date: Aug 2009 Location: South Dakota/California Posts: 3,816	Re: Rebuilding Top End #3032 (Last 1990 Sold) Fired it up and it ran perfectly ......even with TB Coolant BLOCKED Which by the looks of it....NO ONE can tell TB Coolant Blocked at Injector Housing. And.......those hoses for TB Coolant are brand new WITHOUT Clamps (why have clamps when there is NO Coolant Pressure). Those RC SL4-205 Injectors run sooooo smooth Again...this three day Top End included one day for disassembly and repair/restoration of parts, one day for thinking, and one day for re-assembly (including a test drive up to 120 mph). Note: The Nice RC Injectors Red Stencil on corner of rear lift top glass. __________________ Clickable links On Iphone Touchable Links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS Last edited by Dynomite; 08-18-2014 at 04:06 AM.