Quote:
Originally Posted by alwayscode390
My rears work, but my 3rd brake light isn't working and I need it to work to pass state inspection.
I tested the voltage at the bulbs (took the 3rd brake light assembly off and tested close to the bulbs while pushing on the brake pedal).
Is that the right switch I need if I just want to replace the assembly under the pedal?
Thanks! ---
|
Buy this local or if you insist do eBay for it:
http://www.ebay.com/itm/ACDelco-D852...f82189&vxp=mtr
You could also take that GM number to your local NAPA, CARQUEST or whichever parts store is close.
You can check the lt blue also at the ABS module when depressing the brake pedal. There's a splice and both are supplied from the splice. If you've got power at the ABS lt blue then it's NOT the switch.