Quote:
Originally Posted by chriskinzel
According to the FSM, if there is too much, or too little vacuum there should be an error code. No codes. I may, or may not have this switch. I will keep looking for it. I do have a wire connection ( 2 wires with a white connector) that is not hooked up under my plenum. It is towards the front. Not sure where this goes, but I rember unplugging it when removing the secondaries. Problem?
Chris
|
The two-wire plug is for the Secondary Solenoid that actuated the secondary throttle plates. I don't know if it needs to be connected. Hopefully, some who has removed the secondaries will join in.
Jim