Quote:
Originally Posted by KILLSHOTS
I made it real simple...removed the bulb from the DIC during my stereo install. When I adjust the steering wheel to my liking, I can't see the seatbelt light either. Will remove that bulb soon, too, as I tend to know whether my seatbelt is on and don't need the car's guidance in this area.
Ditched the TPMS sensors too. Since refusing to cater to the whims of all these stupid failing sensors, all my DIC says anymore is FULL ENGINE POWER!  |
You could put a 2 Ohm resistor at the air bag connector at the top of the column by just unplugging the air bag OR do it at the bottom of the column at that connector. It will be yellow and obvious going towards the top of the column. I believe 1/2 watt is the preferred. That will put out the "seat belt" light in cluster and it would have put out the DIC also.