Quote:
|
Originally Posted by pennstatefootball
hey Dale,
My motor is clean, but the hoses and black plastic around the motor are not as clean. The LT5 motor should not be hosed off with water (too dangerous).... Is there a product you have that can clean and shine (one step)?
I've used the VRT and In / Out Spray, but what would be best for around the motor (hoses / etc).
thanks!
David
|
David,
What you want to use is a water-based protectant like
303. Clean the hoses with just a damp rag and then let them dry. Apply the 303 every couple of weeks and the hoses will look brand new. You can purchase 303 at a number of online retailers,
AutoGeek I've had great luck with their service.
What you
don't want to use is something like ArmorAll or a tire shine product. These contain silicone which over time (and especially the heat of an engine bay) can start to dry out the rubber hoses. With lower radiator hoses going for hundreds, you're better off stearing clear of these over the long haul.
I like two things about 303. First, it's water based and doesn't stain anything. Second, it contains compounds that provide UVB protection. I apply 303 to my dash and weatherstripping and everything looks brand new.
You can apply 303 to just about anything, but there are better products out there for specific applications. When I worked at the local airport in college, I used to detail airplanes on the side. My boss insisted that I use 303 to wipe down the interiors and leading edges of the flight school airplanes, and I carried this over to those that I detailed as well. Since I would clean up the flight school planes every 4 or 5 days I was amazed at how good they looked for the beating they took.