[Dynomite]

A question regarding Motor Mounts came up and I refreshed an old thread with some additional information regarding Motor Mounts

Oreilly Auto 2902

Summit Racing 2902

Ecklers Motor Mounts

Originally Posted by VetteMed

Good to know -- looks like the same part as the Anchor unit, but who knows.

Anchor 2902, I ordered a private label and a regular inventory closeout, they were the same part but one had a made in india sticker, the other did not, but had INDIA stamped debossed on the rubber portion of the mount.

If buying from Rockauto , the Rockauto catalog is wrong - it lists the L98 mount as the right part for the 90-91 ZR-1, but you need to look up the PN for the LT1 or the later ZR-1 to find the right 2902 part.

Originally Posted by VetteMed

I pulled the headers off today, and removed the motor mounts. Here's what the original 20 year old mounts look like, next to the aftermarket new mounts. Anchor 2902. I ordered a private label and a regular inventory closeout, they were the same part but one had a made in india sticker, the other did not, but had INDIA stamped debossed on the rubber portion of the mount.



The OEM mounts are made in Japan, the aftermarket mounts are made in India. Quality seems OK, but on the mount I used for the passenger side, a little massaging with Mr. Angle Grinder was necessary for proper fit. The tube which slides into the bracket on the block, was a few mm too long, requiring some trimming.