ZR-1 Net Registry Forums - View Single Post - Gettign ready to pull plenum / injector housing.. any tips? What do I need ??

Z51JEFF · 04-13-2014

I havent read the DIY thread but all that have done it have our own little tricks for making it easier.First,take alot of pictures and get Marc Haibecks UNDER PLENUM SYSTEMS CHECK dvd,this will allow you to energize the system and check the operation of the secondaries if you decide to keep them.The biggest hassle is plugging in the spark controller without bending any of the pins.

04-13-2014	#10
Z51JEFF Join Date: Dec 2007 Location: Fremont, CA Posts: 3,093	Re: Gettign ready to pull plenum / injector housing.. any tips? What do I need ?? I havent read the DIY thread but all that have done it have our own little tricks for making it easier.First,take alot of pictures and get Marc Haibecks UNDER PLENUM SYSTEMS CHECK dvd,this will allow you to energize the system and check the operation of the secondaries if you decide to keep them.The biggest hassle is plugging in the spark controller without bending any of the pins.