Quote:
Originally Posted by WVZR-1
The springs are assembled differently on the control-arm ends but carry the same codes. Your springs should have had a 1 1/4" square pedestal so to speak rather than just the rubber molded insulator like the '91 that you purchased.
You should have no issues. If the heights are different in the FSM then there will be differences.
Forgot I have a '94 FSM so:
I checked a '91 FSM and a '94 FSM and the datum line measurements are different with the '91 being less. I checked the reference for C height. Now the image is a bit different but certainly the point isn't. Look at 10-3-2 or 3 in your FSM and look at the datum heights. A '91 @ C is 177mm and a '94 @ C is 192mm. That's pretty close to the difference in the spring height for the two. You might end up a little lower than you intended!
|
Hi, David,
Looks like I need to rework my spring. Rates are different between 91s and 92+ cars.