ZR-1 Net Registry Forums - View Single Post

WVZR-1 · 01-24-2014

I believe if I were serious about an "auxiliary sump" back-up I'd contact Mike Kryger user ID "ZR1 MK" - this is something that he addressed in maybe '04 or so and I would assume he solved. Mike is/was an avid road-racer. I've not seen Mike post for quite some time. I'm quite sure he had no desire to use a "sandwiched" adapter.

I'm sure some here might remember Mike and have contact information for him.

Filter thread is M20 X 1.5 and the gasket specification is shared by most I'm sure "spin-on" that share the 3.750/95.3mm diameter spec. with that thread spec. None of the ***previously linked "sandwich adapters" have the correct specs. Is there one? I didn't see a Canton/Accusump branded one either.

There are many pre-lube systems that could be used effectively for the "Spring-time prime" and I wouldn't think an "onboard" system would be desired or required to accomplish the "prime".

*** Cliff seems to have "edited" his post to eliminate his "previously linked not to spec sandwiched adapters".

01-24-2014	#4
WVZR-1 Join Date: Oct 2004 Posts: 1,884	Re: Accusump Connection I believe if I were serious about an "auxiliary sump" back-up I'd contact Mike Kryger user ID "ZR1 MK" - this is something that he addressed in maybe '04 or so and I would assume he solved. Mike is/was an avid road-racer. I've not seen Mike post for quite some time. I'm quite sure he had no desire to use a "sandwiched" adapter. I'm sure some here might remember Mike and have contact information for him. Filter thread is M20 X 1.5 and the gasket specification is shared by most I'm sure "spin-on" that share the 3.750/95.3mm diameter spec. with that thread spec. None of the *previously linked "sandwich adapters" have the correct specs. Is there one? I didn't see a Canton/Accusump branded one either. There are many pre-lube systems that could be used effectively for the "Spring-time prime" and I wouldn't think an "onboard" system would be desired or required to accomplish the "prime". * Cliff seems to have "edited" his post to eliminate his "previously linked not to spec sandwiched adapters". Last edited by WVZR-1; 01-25-2014 at 03:18 AM.