ZR-1 Net Registry Forums - View Single Post

tomtom72 · 05-05-2007

I would respectfully add from an apprentice Z owner that you might also check the "C"-beam bolts? If they come loose at the anchor point at the diff housing you could get some pinion rotation...wind-up under load and un-winding under no load....the beam attaches at the front of the diff housing where the pinion gear is.

Just a thought.

Tom

05-05-2007	#3
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,609	Re: rear end movement I would respectfully add from an apprentice Z owner that you might also check the "C"-beam bolts? If they come loose at the anchor point at the diff housing you could get some pinion rotation...wind-up under load and un-winding under no load....the beam attaches at the front of the diff housing where the pinion gear is. Just a thought. Tom __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member