ZR-1 Net Registry Forums - View Single Post

Franke · 12-05-2013

Send it to Marc for a first class rework. There is definitely something wrong with it. You didn't adjust the primary throttle plate so unless there is something mechanically wrong with the return mechanism (spring and linkage) it should close down to idle stop.
You did say in the previous post that there was some black gritty jam preventing the secondary's from closing all the way did you get that cleaned out? Did the TB work ok off the car as far as mechanical operation? No binding etc?

12-05-2013	#353
Franke Join Date: May 2013 Location: Beaver, PA Posts: 515	Re: TOP END REFINISHING Send it to Marc for a first class rework. There is definitely something wrong with it. You didn't adjust the primary throttle plate so unless there is something mechanically wrong with the return mechanism (spring and linkage) it should close down to idle stop. You did say in the previous post that there was some black gritty jam preventing the secondary's from closing all the way did you get that cleaned out? Did the TB work ok off the car as far as mechanical operation? No binding etc?