ZR-1 Net Registry Forums - View Single Post

WVZR-1 · 11-26-2013

I'm familiar with them and have spoken to them in the past. They've never done any for me and I would still choose the pass-through but it's certainly a solution for you. Their minimum is 19mm and should do so long as the wheel that you've bought is a 50mm offset. Do NOT assume.

It helps your cause if there's a depression between each wheel stud bore on your wheels. I mentioned posting a snapshot of the wheel back-side a couple posts ago. You need to measure the length of your wheel stud that is exposed from the rotor flange regardless of what they tell you, you will need to either have a recess in your wheel to absorb that additional length or you will need to trim your studs on the car now to a length that's less than the thickness of your adapter.

You need to first confirm the wheel that you've bought - there's no telling for sure with out checking for casting information and confirming that by checking the dimensions with measuring devices.

11-26-2013	#12
WVZR-1 Join Date: Oct 2004 Posts: 1,884	Re: rear wheel question I'm familiar with them and have spoken to them in the past. They've never done any for me and I would still choose the pass-through but it's certainly a solution for you. Their minimum is 19mm and should do so long as the wheel that you've bought is a 50mm offset. Do NOT assume. It helps your cause if there's a depression between each wheel stud bore on your wheels. I mentioned posting a snapshot of the wheel back-side a couple posts ago. You need to measure the length of your wheel stud that is exposed from the rotor flange regardless of what they tell you, you will need to either have a recess in your wheel to absorb that additional length or you will need to trim your studs on the car now to a length that's less than the thickness of your adapter. You need to first confirm the wheel that you've bought - there's no telling for sure with out checking for casting information and confirming that by checking the dimensions with measuring devices.