Quote:
Originally Posted by edram454
I threw my pitted amolds away today. I thought these would fit but they dont. I am in a pickle and need to make these work. the hubcentric spacers are spacers that mount on your hub with bolts and then you bolt the rims on to them. I dont think I will need new wheel studs just more bolts. I found a company that would make 20mm. Let see if I can find 18mm. I contacted carter200 to see if you can sell me some. thanks for your help. edramos.
|
What I mentioned are "pass through" spacers NOT bolt-on adapters. The math is like this, the wheels you bought are 50mm, the ZR-1 wants 36mm, 50 - 36 gets you what I called "even". Everything else is moving the tire/wheel out-board more. I would think anything greater than 18mm is a push. I'd do and I have pass-through. You would need studs. Depending on how your new wheels are constructed you need a minimum of something 20mm or greater to use the adapter you mention. Post a snap-shot of the back-side of your wheel flange.