Quote:
Originally Posted by Paul Workman
A word of caution on the heat sink goop application:
It needs to coat 100%, as mentioned, but very thin - so thin that you can just see the aluminum through the grease.
AND! Be double damn sure you don't have anything like a grain of sand between the DIS module and the plenum; it is a killer, and the module is near unobtainable! In fact, unless there is some reason you must remove it...don't.
Just sayin...
|
Got it there Mr. W; trust that I work STERILE as possible... If a bolt goin' in the hole hits grit, it comes back out and it and the hole gets re-done...
Quote:
Originally Posted by carter200
Quote:
Originally Posted by Schrade
So if there was any question about the Red coolant manifolds being obnoxiously Red (never could decide about etching color), I answered THAT question with the brush last night.
QUOTE]
Will be back in it in the AM here...
Your last email left the engraving to be painted in Yellow bowtie and black LT-5. Anything change since then............  |
|
Yellow bowtie with black LT 5, if you can do it there Carter; I just thought more about it, and never decided either way here...
Out of town now...................................
WHat adhesive is best for re-attaching the C4 emblem to the CC???