Quote:
Originally Posted by Dynomite
Cam Cover Filter
But....you have to remove Cam Covers to install the Cam Cover FIlters.
There is a wire clip that holds the Cam Cover Filters in place in their respective slot in the cam covers (inside the Cam Covers). The wire clip extends through two small holes in the slot sides to keep the filter positioned to the top of the Cam Cover.
I have removed Cam Covers and painted them with engine in car 
|
Good stuff there Cliff; I missed this before...
Quote:
|
It is important to install the correct filter as a replacement. Material that is too loose will capture less oil vapor than necessary. Material that is too dense will cause crankcase pressurization. Excessive crankcase pressure will often cause oil to be ejected from the dipstick tube.
|
More on this later here...............