Quote:
Originally Posted by yzpilot
This may be a stupid suggestion, but thought I would chime in. As most of you all know our Z's are super sensitive to voltage fluctuations. I know when Mike and I were trouble shooting my ECM problem, we were cranking it over several times for various tests. And out of no where and it made a horrible clunk. Scared the crap out of me! Almost sounded like the engine locked! Turned out to just be a little low voltage. 15 minutes on the charger and no problems. Not sure if this is the same clunk, but thought I would chime in! Good luck!
|
You may be right on, I will pull the starter and check it while doing the cleaning under the plenum.
I will report back once that has been completed!