Quote:
|
Originally Posted by tomtom72
Do I understand correctly that you can have headers and the A.I.R. system? Did the headers come with the A.I.R. and O2 bungs in place or is that strictly a fabricate your own deal?
|
They are not Watsons. They are Stainless Works. Marc fabricated the AIR tubes, and he puts his own O2 bungs on the top vs the side, then sends them out for coating. I believe he's done a few with AIR tubes. Unlike the original AIR tubes, these are flush mount and do not protrude into the primary tubes. Looking at the originals, the AIR pipes cut right into the middle of each primary.
I guess next up is head porting, but I'll probably call it quits here. The cost for each hp just goes up and up...
