from your post in another thread:
Quote:
Originally Posted by POWERBRAKEBOB
The piston size in the calipers is small. The C5 calipers are much larger pistons. Nice, but that requires a larger master cylinder to provide the needed volume. C5's and C6's used 1" masters. The bolt pattern on the C4 boosters does not allow for master cylinder upgrading.
|
You can install a 1" Master from a 98-later F-body on the ZR-1 it will bolt up.. needs a spacer (or the end drilled) to get it just right.
So with some of these guys doing C6 Z06 brakes all around, what Master do you suggest? will a 1" be enough?
THEN, which master is correct as you want to be sure the bias is correct front to rear too right?