Quote:
Originally Posted by WARP TEN
I had the problems with window switches and AC. Go to Dynomite's Solutions (top of page-sticky), Electrical and then "AC and Wndow switch connections". The AC is more often than not the long prong connector between the switch face plate and the control head body. Needs cleaning. On windows I found the switch contacts arced over a bit. The switch panel comes out with 2 screws. Good luck. --Bob
|
Well it's not the switches, definitely the motor. I pulled the switch panel and they are working fine, and I can hear the motor clicking as I push the switch, without actually turning. Time to dig further.
Oh and the noise up front is definitely the water pump. Tensioner bobbles a bit but it is not the source of the noise. I suppose this is bonding.
