ZR-1 Net Registry Forums - View Single Post

FU · 09-07-2013

I ended up rebuilding the starter, BUT I was able to install a longer armature and field circuit off of another Denso starter.
NOW, with the PASS bypassed, the clutch switch bypassed, new relays, and higher powered starter, this motor SPINS. It starts now with snap, and never a failure. I am building these starters for your car, if you are in need of a starter that really cranks. I can also rebuild the alternator and water pumps. Up next is a larger bore clutch master and a HYDROBOOST Power brake booster, using a larger (1 inch) master.

You need to start another post about this , good stuff !!

09-07-2013	#2
FU Join Date: Mar 2004 Location: Found Member Posts: 4,327	Re: The Dreaded No Start I ended up rebuilding the starter, BUT I was able to install a longer armature and field circuit off of another Denso starter. NOW, with the PASS bypassed, the clutch switch bypassed, new relays, and higher powered starter, this motor SPINS. It starts now with snap, and never a failure. I am building these starters for your car, if you are in need of a starter that really cranks. I can also rebuild the alternator and water pumps. Up next is a larger bore clutch master and a HYDROBOOST Power brake booster, using a larger (1 inch) master. You need to start another post about this , good stuff !!