ZR-1 Net Registry Forums - View Single Post - Possible Leak

A26B · 08-29-2013

The nut is "self locking" 15mm hex drive, threads are M10-1.5.

If the stud has been leaking, it will frequently come out when you attempt to remove the nut.

If the stud does not come out with the nut, then obtain 2 standard, M10-1.5 nuts and double nut the stud to remove.

08-29-2013	#10
A26B Join Date: Dec 2003 Location: Arcadia, OK Posts: 3,400	Re: Possible Leak - Engine Smoking The nut is "self locking" 15mm hex drive, threads are M10-1.5. If the stud has been leaking, it will frequently come out when you attempt to remove the nut. If the stud does not come out with the nut, then obtain 2 standard, M10-1.5 nuts and double nut the stud to remove. __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.