View Single Post
Old 06-26-2013   #8
scottfab
 
scottfab's Avatar
 
Join Date: Jan 2009
Location: Portland Oregon metro area (Washington side)
Posts: 3,193
Default Re: Easiest way to remove CDM Radio Module ??

Quote:
Originally Posted by DarkAngel View Post
Hello,

Finally removed the CDM and replaced with a new one
It was easier than i thought : took 30mn to take it and replace it
but ...
that was my experience also from the bottom.

Quote:
Originally Posted by DarkAngel View Post
i found only 3 connectors on the 4 available on the cdm and im facing different issues:
Did you take pictures to show these connectors?

Quote:
Originally Posted by DarkAngel View Post
- the antenna does not work
- front speakers does not work (only rears works)
Antenna and speaker are likely separate issues. They are common failures on a 20yr old car.

Quote:
Originally Posted by DarkAngel View Post
Is it normal that there is only 3 on the 4 connectors plugged ?
Do i have to look for one that could be hidden somewhere under the dash ? or do i have to worry about the antenna and front speakers that might be dead ?
same answer as above.

Quote:
Originally Posted by DarkAngel View Post
Actually, radio works but without antenna, the reception is really weak; the tape works but cd player does not recognize the cd; it only load and eject
CD failure you describe is also common. The ribbon coming from the read head often rubs on the circuit board. Over time this ends in failure when the ribbon wears through.
__________________
Scott


Vett owner since 1979._It's about the car and the people
scottfab is offline   Reply With Quote