Quote:
Originally Posted by A26B
Look closely under the accordian air tube where it is clamped to the air horn. Very little clearance under there and I have seen the belt rubbing the clamp & chafe the belt. May need to move the clamp a little to get it away from the belt.
|
Thanks for the tip Jerry,
Has a Samco coupler and no rubbing from the clamp.
When you look at the A/C Compressor pulley from the side, you can see the belt riding up on the rear edge of the pulley, I thought maybe someone did not center the belt on the pulley when installed so I took tension off the Belt Tensioner and re-centered the belt on the pulley, only to have it go back to rubbing on the edge of the rear of the pulley once started which is telling me the pulley is too far forward by about 1/8" or more.
Gibby