Quote:
Originally Posted by -=Jeff=-
I assume you are still using the PCV Valves?
If I recall, OEM the tube come out of the IH and then through 2 PCV in parallel, then to the Plenum for vacuum.. so which side of the PCVs are the cans on?
Thanks
|
PVC valves are still used in between the intake vacuum port and the upper portion of the canisters.
They are installed in this manner -
Intake vacuum line - hose- PVC- hose- canister.
Vacuum from the intake pulls from the top of the canisters which then pulls from the inside of the canister then from the bottom port which is attached to the injector housing. I don't really think I need them anymore but I must research more on that subject.