Re: DIS Failure symptoms?
I had a DIS module get flakey on my 93. when the car would sit outside, and there was heavy moisture in the air the car would buck and spit and stumble until it ran enough to "dry it out"
thought it was just bad plug wires but it finally started to code (don't remember what it was, it was a long time ago)
as long as I drove the car often and it stayed inside snug, warm and dry, it never happened.
this was my LPE 475 car, ported, billet rods, forged pistons, stock cams
car only made 400 at the tire, which was really disappointing since I "thought" it was a 368 from the LPE dyno sheet (engine stand) that showed 563
seriously doubt that dyno sheet was from the car I bought
or it was the worse case of "happy dyno" I've ever seen
car was strong and ran great, but it wasn't anywhere 563 based on 400 at the wheels. and it needed a tune to get there. first few pulls were at 378. boy was I disappointed.
sorry for the ramble, good luck finding the problem
|