ZR-1 Net Registry Forums - View Single Post

guinnessdood · 03-15-2007

Jeff can probably do it. I know that economically it is a good idea to go up to 368 cubes if you are gonna need new liners or pistons or both...the price will be the same and you'll get a lil more umph!...and since you're in there have Rob port and polish the whole top end including the heads...I think that's what I would do...maybe even go LOW compression in hopes of the TT setup that's imminent from Ron and Jerry (Raptor, LLC)...

03-15-2007	#6
guinnessdood Join Date: Oct 2004 Location: Woods Cross, UT Posts: 389	Re: who does stk rebuilds Jeff can probably do it. I know that economically it is a good idea to go up to 368 cubes if you are gonna need new liners or pistons or both...the price will be the same and you'll get a lil more umph!...and since you're in there have Rob port and polish the whole top end including the heads...I think that's what I would do...maybe even go LOW compression in hopes of the TT setup that's imminent from Ron and Jerry (Raptor, LLC)...