Quote:
Originally Posted by KJL
That would leave the the only other source being the injector housing to head connection. This area is wet and I was hoping the oil was coming from else where. It still strikes me as odd with this being the intake, this area should be in vacuum.
|
Crankcase Ventilation Cover is another source of oil leaks under the Plenum.
In answere to your other question on CF regarding Cam Cover Removal engine in car......
Cam cover bolt removal tools
Cam Cover Installation Tricks
Cam Cover Vent Material
Removing cam cover bolts
Cam cover bolt washers
Cam cover dowty washers
Cam cover vent material
Cam cover SS vent material
Cam cover sealant A136
Cam Cover Filters
In regard to removing Cam Covers Engine In Car, you have to make sure you keep solid pressure on the Torx or Allen if you have replaced Torx with Allen. And yes...there IS room to lift up and over.....the hard part is cleaning up the mating surfaces of oil especially the end camshaft rubber grommets and reapplying Loctite 518
Use of thread Lubricants, Loctite and Sealants