[LancePearson]

Good luck geting it all put together. I got mine back late this afternoon with the pre emptive stuff done and need to call and see what they did to turn my underhood lights off. Worked fine before the shop had it. Will go out and reverse the fuse in case it's a polarity issue. You just pull the fuse down by the driver's side head light area to turn them off for long periods when the hoods up for hours and since I have leds now it is possible even the fuse has to be one way though that seems strange. the leds only work one way with polarity. Will check before bed than call tomorrow if that isn't it. Need to wash some fingerprints off as well. They do a good job but they are human. Did the work fine. The belt was new enough even though I had them replace it since it was a min. of 8-10 years old but the pulley that is in the tensioner had a small vibration at high speed which was what was probably making the sound and that was replaced and all is well with the engine now. I just want no problems on the two upcoming drives that I could have avoided and I now know the provenance of all the major systems and maintenance items because I've been through most once with me and mine here now.

I should have just stuffed a rag into the chamber area below the radio when I had it opened up but it's not worth messing further with. next time open, maybe so.