Good stuff
Craig 
I see on the chart our
AMSOIL 10w 40 zinc 1378. This engine has the Headers so no issues with CATS and zinc
This LT5 was installed (with Headers Attached) in the ZR1 with AMSOIL 10w 40 to the full mark on the Dipstick.
Engine was installed in this ZR1 with
Headers, Injector Housings and Pressure Plate attached. Windshield Wiper motor (drivers side) and AC Temp sensor Cover (passenger side) were removed for ease of installation. A load Leveler has to be used and the engine must be lifted with soft slings attached to the center of Harmonic Balancer and to the center of Pressure Plate. Hood was NOT REMOVED.
Installing Engine In ZR1
Quote:
Originally Posted by HAWAIIZR-1
Hello Franz,
You might already have this, but the AMSOIL technical dept sent me this so I thought I would share just in case because it is good information for us. As mentioned, our LT5s might not need as much ZDDP as the ZROD offers as well as the concerns for folks that have catalytic converters should be considered:
I hope this helps.
Craig |