[Dynomite]

Originally Posted by zr1mom

Could be a grounding issue. But first I would reset everything.

Originally Posted by Scrrem

Mark, Regarding the INFL REST light, Both senser need to be remove and clean the frame where they mount. I scrubbed with a wire brush, and remounted using di-electric grease.
Rich

I concur with zr1mom and Scrrem.......the first thing I would do is clean all the grounds on the engine block and Frame (always good to do to prevent future issues). I would also clean up the junction connector block just to the right of the battery (remove all the little red wires and steel wool them as well as the nut and connections). Clean the battery posts and make sure your battery is fully charged as well as make sure you negative cable is clean and making good contact with the engine block and engine block to frame. Already suggested positive battery cable cleaned on junction connector block.

Originally Posted by scottfab

Then I'd use the search feature of this forum for threads that cover it. (homework)
Or you may get lucky and find a fix in an old thread.

Then I would pass on the "homework" and use the resources in my signature where the "homework" has already been done.
I have already found a thousand fixes in "old threads"
Or.....if you like...."new fixes" in a "new thread".....second resource