ZR-1 Net Registry Forums - View Single Post

AndrewFL · 01-12-2013

Marc that's a great point, I could not get cruise to work after that drive.

Upon further digging, I found that the small plastic hose that goes from the passenger side of the motor, under the plenum, then runs to the injector wire harness, does not hold vac. However I can't find where that hoses runs to.

Where does the hose go? I tracked it under the plenum towards the firewall, but once it joins the injector wires, I can't follow it an more.

01-12-2013	#8
AndrewFL Join Date: Jan 2013 Location: Central Florida Posts: 4	Re: MY 94 Cruise Control Marc that's a great point, I could not get cruise to work after that drive. Upon further digging, I found that the small plastic hose that goes from the passenger side of the motor, under the plenum, then runs to the injector wire harness, does not hold vac. However I can't find where that hoses runs to. Where does the hose go? I tracked it under the plenum towards the firewall, but once it joins the injector wires, I can't follow it an more. Last edited by ZBrink; 01-26-2025 at 12:28 AM.