ZR-1 Net Registry Forums - View Single Post

mgg · 12-30-2012

XFire, thanks for the info. My guestimate comparing to my other car was about 12. WVZR-1 sent me a great link which describes the problem I am having with the collar nut interfering with the control arm bolt. I am going to have to grind the bolt down even more than I did. Plus, I noticed the the shock bushing on the botton of the shock is not stock. It is the poly bushing and it is MUCH wider than the stock bushing. With a little more grinding and replacing the stock shock bushing with a poly bushing , this should give me enough room to eliminate the interference. Thanks again to all who have helped with this install.

12-30-2012	#130
mgg Join Date: Aug 2009 Location: Hamilton, Va. Posts: 113	Re: GB: DRM Coilovers XFire, thanks for the info. My guestimate comparing to my other car was about 12. WVZR-1 sent me a great link which describes the problem I am having with the collar nut interfering with the control arm bolt. I am going to have to grind the bolt down even more than I did. Plus, I noticed the the shock bushing on the botton of the shock is not stock. It is the poly bushing and it is MUCH wider than the stock bushing. With a little more grinding and replacing the stock shock bushing with a poly bushing , this should give me enough room to eliminate the interference. Thanks again to all who have helped with this install.