Re: Rough running - Need help and advice
Update 2
The plenum is off. I found good and not so good.
The good:
All of the injectors test with 12.1-12.6 ohms resistance.
I don't see any oil leaks down in there. Though there is some shredded insulation way down in the valley. I guess some critter once called that home?
Not so good:
I found charcoal all the way up to and beyond the purge valve. When I rub a finger inside the runners on the plenum I can feel grit on my skin. I blew a few particles of charcoal out of the engine side of the purge valve tube. The one that leads to the plenum.
Is it normal to have some oil in the plenum? I have oil in the end of the purge tube and can see evidence of oil on the secondary throttle plates. There is a film of oil inside the plenum.
I took a couple of photos of my findings but do not how how to post them here. If anyone is curious or would like to host them please let me know.
Right now I plan to order a coil and some gaskets on Monday. Before I put it together I will flush out the plenum and clean as much of that stuff out as I can.
Right now it's time for a break.
SharkPilot
|