View Single Post
Old 10-09-2012   #82
RICKYRJ1
 
RICKYRJ1's Avatar
 
Join Date: Dec 2005
Location: Tinton Falls, NJ
Posts: 1,169
Default Re: 368...should I, could I, would I

Quote:
Originally Posted by Hib Halverson View Post
Good point. My guess is the last new development Lingenfelter's or Automasters have done on LT5 performance enhancements came in the late 90s/early-00s.

And, yes, I get the implication in your question, but, to me, it seems, maybe, a little bit arrogant. I suggest that it's unlikely you'd be where you are now had those folks not done their "20 year old stuff."

Ya think your attitude might sour potential customers who are outside of your flock of admirers here on the Registry forum? Much less get someone connected with media interested in your product?

Good question which I can't answer. I stated earlier that I based my belief on what Haibeck said to me in an email. I have not personally tested a closed deck LT5 for oil control but, I do put some faith in what Marc tells me. I've known him for a long time.
Thankfully, mine does not...at least, not with the way I drive it most of the time. I suppose, if I was tracking the car and running laps such that the engine spent lot of time above 5000 rpm, I probably would. Currently my oil consumption is about a quart every 8000-miles. In the "old" days, when the car was a magazine project, we put about 100 dyno passes, maybe a dozen or so drag strip passes and several track days on the car, but nowadays, it just gets run hard on the street.

Three trips from DesPlaines to BG and back cruising on the highway along with, say, fifteen or so, 11-sec. drag strip passes. I take it, I'm to accept that as demonstrative of good durability and oil control superior to that of "20-year old stuff"? That in mind...I'm curious. Have you run any GM durability test schedules on the engines you build?
Nope. There's nothing really wrong with it other than 60,000 or so miles and 15 years in service. Ok. I admit that, of late, my oil use has gone from about a quart every 10,000-miles to a qt in 8000-mi, so maybe I need stem seals. Mainly, I just was thinking of updating the engine but, admittedly, I want to do it on (as someone else aptly stated) a "beer budget."

I submit: if you truly believed that, you'd be doing LS7s.
I find this response out of line for the question Pete has asked. Pete and the FBI Crew have been on the cutting edge of the many LT5 improvments. These guys are running some fast reliable Z's. Most members here would not hesitate to hand their cars over to them to work on. From what I have read in the posts the only thing these guys were trying to do was help you maximize your performance dollars. Its your car so its your call, but remember you asked the question in the 1st place. Good Luck
RICKYRJ1 is offline   Reply With Quote