Quote:
Originally Posted by scottfab
Why only 368?
For a few $ more......
|
Well, I'm kinda fixated on the 368 because, if I did it, it'd have to be for under 10 grand and to go 385, I'd need a crankshaft which I bet costs $4000.
My 350 already makes about 500-hp via the port work and other engine mods I have already. I can easily spin the tires, which are F1 Supercars. A good 385 which is streetable, is going to make 580 or so and a good 415 is over 600. All that would do is spin the tires more, but not make the car that much quicker. Obviously, if I put slicks on the car, it'd be a different story...but then I'd be breaking driveline parts.
A comment was made about a 368 with different intake cams failing California's smog check. No doubt, the reason I'm still not sure about the cams is just that–the smog check. Actually the smog check is also why I may have to retain my ported stock exhaust manifolds and cats.
I'm not a drag racer (at least not a frequent one) and I think a 540-550-hp 368, coupled with the right suspension upgrades (right now, other than revalved SRC shocks, my suspension is stock) and a 3.73 axle (right now, the ratio is stock) would make a really fun car. It won't catch my 12 Z06 on a road course, but it will keep it in sight.