ZR-1 Net Registry Forums - View Single Post

chriskinzel · 08-29-2012

Thanks for the ideas Scott. The car ran fine with the exception of the low coolant code (I think is was 15) befor I replaced the sensor. I did lose a lot of coolant wile replacing the sensor. No codes, no pinched wires, turns over OK but no spark. I did rinse with water os there would not be antifreeze residue in the valley. I have bypassed the VATS and the cluch safety switch. Like I said, it ran fine into the garage. I am going to try to take all electrical plugs apart and spray the with cleaner tomarrow. If that doesent work I think I will just shoot it and put one of us out of missery.

08-29-2012	#13
chriskinzel Join Date: Nov 2011 Location: Salt Lake City, Utah Posts: 167	Re: No Start Thanks for the ideas Scott. The car ran fine with the exception of the low coolant code (I think is was 15) befor I replaced the sensor. I did lose a lot of coolant wile replacing the sensor. No codes, no pinched wires, turns over OK but no spark. I did rinse with water os there would not be antifreeze residue in the valley. I have bypassed the VATS and the cluch safety switch. Like I said, it ran fine into the garage. I am going to try to take all electrical plugs apart and spray the with cleaner tomarrow. If that doesent work I think I will just shoot it and put one of us out of missery.