View Single Post
Old 08-18-2012   #7
Scrrem
 
Scrrem's Avatar
 
Join Date: Feb 2009
Location: Alexandria, Virginia
Posts: 1,453
Default Re: air bleed with plenum coolant bypass

I have done several injector replacements and I have never see injectors with 2 O rings on any of the injectors, primary or secondary. Also, those blue caps are put on when the injectors were shipped, I believe they should have been removed before installation. I went with the FIC stainless injectors and they have performed flawlessly.

I did not use any permetex on my gaskets, the gasket should seal fine by itself. If you ever need to put the plenum in the future, it will make plenum removal easier and no need to replace the gasket.

Rich
__________________
1990 Bright Red Coupe #608

380 Stroker, Ported Heads/Intake/Housings/TB
Haibeck Secondary Delete Chip / Pete's Cams
George Braml Intake / FIC Injectors
Coated SW Headers / Corsa
Bill Boudreau B/B ZF6 / Viper 4.10 gears
Ron Davis Radiator
Pioneer AVIC-Z140BH NAV
Fikse FM5's 285 / 335 / C6 Brakes

WAZOO Member
Scrrem is offline   Reply With Quote