ZR-1 Net Registry Forums - View Single Post

368zr1 · 01-15-2007

As you can see on the schematic only 2 pins on the Valet/Power Key Switch are used.

When the switch is in Full Power Mode, the Dark Blue/White wire
is connected thru the switch to ground.

01-15-2007	#2
368zr1 Join Date: Jul 2005 Location: Annapolis, MD Posts: 12	Re: 1990 Power switch As you can see on the schematic only 2 pins on the Valet/Power Key Switch are used. When the switch is in Full Power Mode, the Dark Blue/White wire is connected thru the switch to ground.