Quote:
Originally Posted by GOLDCYLON
Key on, Engine off.
Press ENG MET within 5 second press it again.
Press and hold GAUGES button. CHANGE OIL light will flash.
Hold until CHANGE OIL light stops flashing. When it stops it is reset
|
Or place a small flathead screw driver in front of the "Change Oil" light. While holding the screwdriver w/ your left hand, grab a standard general purpose hammer w/ your right hand. Gently tap the end of the screw driver until the blade penetrates the plastic lense and break the lamp behind the plastic lense. Replace all tools back in the appropriate storage compartment - Just funning with you Jim.
