Re: air bleed with plenum coolant bypass
I plugged my injector housings and removed all the coolant tubing from the plenum but was concerned about air pockets forming (Mark H had some issues with this). I drilled and tapped fittings on the back side of the injector housing and ran the hosing under the plenum and back to the recovery tank. Here's some pics of the finished product.
Rich
__________________
1990 Bright Red Coupe #608
380 Stroker, Ported Heads/Intake/Housings/TB
Haibeck Secondary Delete Chip / Pete's Cams
George Braml Intake / FIC Injectors
Coated SW Headers / Corsa
Bill Boudreau B/B ZF6 / Viper 4.10 gears
Ron Davis Radiator
Pioneer AVIC-Z140BH NAV
Fikse FM5's 285 / 335 / C6 Brakes
WAZOO Member
|