ZR-1 Net Registry Forums - View Single Post - Ram Dual Disc Clutch vs. Traditional GM clutch

Bob G · 07-01-2012

the bolt is supplied with the bearing all You need to do is drill a 1 inch to a1 1/4 inch hole in the bellhousingat about 4 o clock, there is a nice flat spot there, this allows you to stick a screwdriver in and line up the bearing

07-01-2012	#5
Bob G Join Date: Dec 2005 Location: Huntley IL Posts: 170	Re: Ram Dual Disc Clutch vs. Traditional GM clutch the bolt is supplied with the bearing all You need to do is drill a 1 inch to a1 1/4 inch hole in the bellhousingat about 4 o clock, there is a nice flat spot there, this allows you to stick a screwdriver in and line up the bearing