ZR-1 Net Registry Forums - View Single Post - Changing clutch

Paul Workman · 05-26-2012

Dittos on the beam plates.

As for parts, the Veleo is no longer being made. However, the LT1/4 PP will work, if you even need one (recommended). Shorter PP bolt are needed is all.

Good time to flush the clutch, while you have the slave out.

If you can't find an OE clutch, call Pat at Ram Clutch. He has worked up a single or a dual disc clutch for the ZR-1; a conversion to a push type PP using a hyhydraulic TO bearing. Really nice stuff!

P.

05-26-2012	#7
Paul Workman Join Date: Nov 2007 Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri Posts: 6,466	Re: Changing clutch – can I do this myself? Dittos on the beam plates. As for parts, the Veleo is no longer being made. However, the LT1/4 PP will work, if you even need one (recommended). Shorter PP bolt are needed is all. Good time to flush the clutch, while you have the slave out. If you can't find an OE clutch, call Pat at Ram Clutch. He has worked up a single or a dual disc clutch for the ZR-1; a conversion to a push type PP using a hyhydraulic TO bearing. Really nice stuff! P. Last edited by Paul Workman; 05-26-2012 at 01:04 PM.