ZR-1 Net Registry Forums - View Single Post

zr1don · 03-27-2012

Two options for overcoming the problem with plugging in the O2 sensor on the right side:

1. Make or buy an extension, pull the existing sensor wire out at the rt front side of engine, plug the extension in and thread it down the way it came out. You should fasten the excess wire you now have near the O2 sensor.

2. You can remove the O2 wires from the wire loom up to the rear of the engine (the loom runs under the plenum) and reroute the wires down the rt rear of the engine.

03-27-2012	#22
zr1don Join Date: Jan 2006 Location: Temecula, CA Posts: 88	Re: CAN'T PASS CALIF. SMOG, IDEAS/HELP!!!! Two options for overcoming the problem with plugging in the O2 sensor on the right side: 1. Make or buy an extension, pull the existing sensor wire out at the rt front side of engine, plug the extension in and thread it down the way it came out. You should fasten the excess wire you now have near the O2 sensor. 2. You can remove the O2 wires from the wire loom up to the rear of the engine (the loom runs under the plenum) and reroute the wires down the rt rear of the engine.