ZR-1 Net Registry Forums - View Single Post

Paul Workman · 02-21-2012

If you want new, the Accels you want are #150821s and Summit usually has them in stock. 16 are going to run around $600. When these injectors are re-purposed to be used in the LT5, the secondary injectors require the little plastic keying rib to be removed to allow the connector to attach. No big deal at all. It only takes about 5 minutes with a Dremel for all 8, or if you have a shop grinder - about 5-10 seconds each and you ready to go.

P.

02-21-2012	#4
Paul Workman Join Date: Nov 2007 Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri Posts: 6,466	Re: what injector to use If you want new, the Accels you want are #150821s and Summit usually has them in stock. 16 are going to run around $600. When these injectors are re-purposed to be used in the LT5, the secondary injectors require the little plastic keying rib to be removed to allow the connector to attach. No big deal at all. It only takes about 5 minutes with a Dremel for all 8, or if you have a shop grinder - about 5-10 seconds each and you ready to go. P.