ZR-1 Net Registry Forums - View Single Post

Shrek · 01-03-2012

Shove it out with your thumb! Reinstall it further in than it is now and it's self adjusting when apply pressure on the pedal for the first time.

***EDIT*** OOPS! typed that wrong for reinstall. Shove it back in with pedal slightly depressed, then when you release the pedal it will self adjust the depth. Or you can shove it in against the pedal bracket, but make sure the plunger on the switch is fully depressed. The pedal bracket holds the contacts open, then when you depress the pedal, the plunger extends outward and makes contact inside the switch. Hope that makes more sense

01-03-2012	#10
Shrek Join Date: Sep 2010 Location: Currituck, NC Posts: 246	Re: High Mount Brake Light, Not Working Shove it out with your thumb! Reinstall it further in than it is now and it's self adjusting when apply pressure on the pedal for the first time. *EDIT* OOPS! typed that wrong for reinstall. Shove it back in with pedal slightly depressed, then when you release the pedal it will self adjust the depth. Or you can shove it in against the pedal bracket, but make sure the plunger on the switch is fully depressed. The pedal bracket holds the contacts open, then when you depress the pedal, the plunger extends outward and makes contact inside the switch. Hope that makes more sense Last edited by Shrek; 01-03-2012 at 07:28 PM.